Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
Place of Origin: | China |
---|---|
Brand Name: | Genius Robotics Zhenkang |
Certification: | CE , ISO9001 , ISO14001 |
Model Number: | ZK1400-06 |
Minimum Order Quantity: | 1 set |
Price: | Negotiation |
Packaging Details: | Export standard plywood case, Metal seal box |
Delivery Time: | 7 - 10 Working days |
Payment Terms: | T/T, L/C |
Supply Ability: | 500/Month |
Product Name: | Aluminum Welding Robot | Material: | Aluminum Alloy Or Aluminum |
---|---|---|---|
Field: | Industrial | Degree Of Freedom: | 6 |
Other Charactrtidtics: | Compact | Reposition Repeatability: | 0.03mm |
High Light: | robotic welding arm,ac mig welder |
Robotic aluminum welding reduces welding defects
Ordinary welding equipment is completely controlled by manual experience. Therefore, if the solder joints are high or low, and the output and power supply stability of the equipment are not ideal, the false soldering phenomenon is likely to occur. In order to prevent the occurrence of similar phenomena, on the one hand, the solder joint is required to be stable, and on the other hand, the power supply and the transport are required to be stable.
The welding robot can do this. It can adjust the welding speed according to the current and voltage of welding workpieces with different materials and thicknesses to find a suitable welding parameter, thus reducing the probability of welding defects.
In addition to replacing the equipment with a welding robot, preparation before welding is also very important. If the welded part is aluminum and the surface of the aluminum has an oxide film, the oxide film must be cleaned before welding.
Then, it is welded by a welding robot within three hours after the oxide film is cleaned, otherwise a new oxide film is generated due to oxidation with air, thereby affecting the actual welding quality.
Robotic aluminum welding requirements for aluminum welding wire
The robot welding aluminum alloy can be selected from barrel aluminum welding wire or aluminum wire welding wire as needed. In order to reduce the frequency of replacing aluminum welding wire, the robot should use barreled aluminum welding wire.
However, due to the use of the barreled aluminum welding wire, the wire feeding hose is long, the resistance is large, and the quality of the aluminum wire is high. When the aluminum welding wire with poor quality is used, the surface of the aluminum welding wire will be reduced due to the friction, and the resistance will increase when the wire is fed at a high speed. The aluminum welding wire cannot be smoothly sent out, which makes the arc unstable and affects the quality of the weld.
In severe cases, the phenomenon of jamming causes the robot to stop, so it is necessary to clean the aluminum wire guide in time.
Robotic aluminum welding robot body specification
Robot model | ZK1400-06 | |
Application | Arc welding | |
Mounting | Vertical ground installation, lifting, hanging | |
Number of axes | 6 | |
Payload | 6kg | |
Max working radius | 1400mm | |
Repeated posiontioning accuracy | 0.03mm | |
Maximum joint range | J1 | RV reducer ±160° |
J2 | RV reducer +110°, -70° | |
J3 | RV reducer +65°, -120° | |
J4 | RV reducer ±150° | |
J5 | Hollow harmonic reducer +105°, -110° | |
J6 | Hollow harmonic reducer ±320° | |
Maximum joint speed | J1 | RV reducer 201.9°/S |
J2 | RV reducer 198.3°/S | |
J3 | RV reducer 198.3°/S | |
J4 | RV reducer 296.2°/S | |
J5 | Hollow harmonic reducer 197.5°/S | |
J6 | Hollow harmonic reducer 247.2°/S | |
Allowable bending moment N.m | J4 | RV reducer 9.8N.m |
J5 | RV reducer 9.8N.m | |
J6 | Hollow harmonic reducer 4N.m | |
Allowable inertia Kg.㎡ | J4 | RV reducer 0.3kg.㎡ |
J5 | RV reducer 0.3kg.㎡ | |
J6 | Hollow harmonic reducer 0.05kg.㎡ | |
Body total weight | KG | 185KG |
Operating environment | Temperature | 0℃ - 45℃ |
Humidity | 20% - 80% | |
Others |
Keep away from corrosive gases or liquids or explosive gases, |
|
Power capacity | 6KVA (Robot) + 24KVA (Welding source ) |
Manufactor of robotic aluminum welding
Independent core components, first - rate price.
Independent anti - collision design, first - class safety.
Open control system, first - class compatibility.
High rigidity body design, first - rate accuracy.
Positioner of robotic aluminum welding (Optional)
The positioner is generally linked with the robot and is an additional axis of the robot. It can cooperate with the robot to complete the welding of complex workpieces. The high - performance positioner repeatability can reach 0.1mm.